The end delivery pipe of the pump truck, also known as the concrete delivery pump hose, is suitable for connecting the end of the construction machinery pump truck during concrete transportation, and can flexibly change the pouring position for small-scale concrete paving. There are many direct selling concrete wear-resistant rubber hose manufacturers in China.

In daily life, following certain operating rules can reduce the occurrence of pump failures. So what should be paid attention to during the operation of the concrete conveying pump hose? We visited relevant experts to address this issue.

Experts point out that concrete needs to be skillfully operated by operators from raw materials to uniform mixing until it is pumped to the pouring site in order to proceed smoothly. Keeping in mind the construction safety of each operation step during construction can reduce many safety hazards. So what should be paid attention to during the operation of the concrete conveying pump hose? Specifically, it can be approached from the following aspects:

1. During the process of using concrete pumps to pump concrete through pipelines, contact should be made with the front-end hose operator when starting or stopping the pumping of concrete. The bending radius of the front hose should be greater than 1 meter, and operators are not allowed to stand at the outlet of the pipe to prevent sudden spraying of concrete and injury to people.

2. The conveying pipeline should be fixed and compacted, and it is strictly prohibited to bend the conveying hose to avoid hose explosion. When the pipeline is blocked and pumped after treatment, the end of the soft joint will swing rapidly, and concrete may be sprayed instantly. Workers should not approach the hose.

3. Do not stand at the corners of the building, hold the end hose in your hand, the shaking of the hose or concrete spraying may cause the operator to fall from the building.